Rival GR225 User Manual
Page 4
4-
HOW TO USE YOUR ELECTRIC GRIDDLE
Before use, wash the GRIDDLE PLATE and LID in warm soapy water or in
the dishwasher and dry completely.
CAUTION: Do not immerse HEATING BASE in water or other liquids.
1. Set the skillet on a flat, dry, heat resistant surface.
2. Make sure that the GRIDDLE PLATE is sitting securely on the HEATING
BASE. The GRIDDLE PLATE should be snapped into place on the
HEATING BASE. Insert the left side of the plate into the left notch. Push
right spring latch outward and press the plate down. Release the spring
so plate is securely latched to HEATING BASE. Condition the non-stick
cooking surface with vegetable oil, wiping off any excess with a paper
towel. If GRIDDLE PLATE is not secured on HEATING BASE the griddle
may not work properly.
3. Insert GREASE TRAY into guides
under the front of the griddle. Turn
TEMPERATURE CONTOL DIAL to
"OFF". Plug griddle into standard 120V
AC outlet and turn TEMPERATURE
CONTROL DIAL to desired setting.
NOTE: Due to manufacturing process,
during initial use of this appliance, some slight smoke and/or odor may
be detected. This is normal with many heating appliances and will not
recur after a few uses.
KNOW YOUR ELECTRIC GRIDDLE
Temperature Control
Panel
Grease Tray
Side Handle
Heating Base
Legs
Griddle Plate