Rhino Mounts SE42 - Manual (Page 99)

OPERATION
SE42 03/08 Operation Section 4-17
© 2008 Alamo Group Inc.
OPERA
T
ION
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety devices should be
inspected carefully at least daily for missing or broken components. Missing, broken,
or worn items must be replaced at once to reduce the possibility of injury or death
from thrown objects, entanglement, or blade contact.
(SGM-3)
• Ensure the tailwheel beam position support
bolts are properly installed and tightened.
• Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0039_B
• Inspect the gearbox oil level. A low oil level is a
warning sign that the gearbox may be cracked
or its seal is damaged and needs replacement.
• Ensure the gearbox vent is in place and free
from clogs. OPS-R-0040