Roland PC-600 - Manual (Page 7)

7
After the installation finishes you are asked whether or not you want to restart your computer.
19 Click Restart.
The software installation is now complete. Before printing, however; you will need to add a setup and then go to
the chooser and select the appropriate printer description.
20 Double-click the RCC for ColorCAMM icon to start the software. The Add Setup dialog appears.
21 Select your printer in the list and then click Next. You are prompted for the port to which the selected printer is
connected.
22 Choose the appropriate port and click OK.
23 Open the Chooser from the Apple menu and highlight AdobePS.
24 Locate your computer. It should say ColorCAMM PC-600@computer, where “Computer” is the name of your
Macintosh.