Regency I1200 - Manual (Page 2)

188 June 2007 Regency Product Specifi cations Book
W
ood Inser
ts
Wood Inserts
I1200 Wood Insert
Dimension Description I1200
A Adjacent Side Wall (to side) 15” (381mm)
B Mantle (to top)** 20” (508mm)
C Top Facing (to top) 14” (356mm)
D Side Facing (to side) 7-3/8” (187mm)
E Minimum Hearth Extension* 16” (406mm)
F Minimum Heath Thickness* 1-1/2” (38mm)
G Minimum Hearth Side Extension 8” (203mm)
Side and Top facing is a maximum of 1-1/2" thick.
Floor protection must be non-combustible, insulating material with an
R value of 1.1 or greater.
* If the hearth extension is fl ush with the fl oor (F) it must extend
19-1/2" in front of the body face (E).
Note: Hearth Extension Width (G) is measured from edge of fuel
door to side of hearth.
** A non-combustible mantel may be installed at a lower height if the
framing is made of metal studs covered with a non-combustible
board.
I1200 Small Wood Insert