Regency Proflame GTM 9.957.03605 - Manual (Page 8)

8
ENGLISH
Remote Flame Control
The Proflame GTM has six (6) flame levels. With the system on, and the flame level at the
maximum in the appliance, pressing the Down Arrow Key once will reduce the flame height by
one step until the flame is turned off. The Up Arrow Key will increase the flame height each time
it is pressed. If the Up Arrow Key is pressed while the system is on but the flame is off, the flame
will come on in the high position. ( Fig. 8 & 9 ) A single “beep” will confirm reception of the
command.
Fig. 8: Flame Off Flame Level 1
Fig. 9: Flame Level 5 Flame Level Maximum
Fig. 10 Fig. 11
SET TEMPERATURE
ROOM TEMPERATURE
ROOM THERMOSTAT ( Transmitter Operation)
The Remote Control can operate as a room thermostat. The thermostat can be set to a desired
temperature to control the comfort level in a room.
To activate this function, press the Thermostat Key (Fig. 1). The LCD display on the Transmitter will
change to show that the room thermostat is “ON” and the set temperature is now displayed (Fig.
10). To adjust the set temperature, press the Up or Down Arrow Keys until the desired set
temperature is displayed on the LCD screen of the Transmitter.