Rosewill R500N - Manual (Page 5)

Read all these instruction and save them for later use.
Follow all warning and instructions on the product.
Product
Do not block the vent holes in the case.
Do not insert sharp objects or spill liquid into the LCD monitor through
cabinet slots.
They may cause accident fire, electric shock or failure.
Disconnect the power plug from the AC outlet if you will not use it for an
indefinite period of time.
Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks.
Do not touch the screen directly with your fingers. You may damage the
screen, and oil from your skin is difficult to removed.
Do not apply pressure to screen. The LCD is very delicate.
Power
Use the type of power indicated on the marking label.
Plugs
Do not remove any of the prongs of the monitor
,
s three-pronged power plug.
Disconnect the power plug from the AC outlet under following conditions:
If you will not use it for an indefinite period time.
When the power cord or plug is damaged or frayed.
If the product does not operate normally when the operating instructions
aye followed.
Adjust only those controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal
operation.
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance, indicating a need
for service.
Power and extension cords
Do not allow anything to rest on the power cord.
Do not locate this product where persons will walk on the cord.
Use the proper power cord with correct attachment plug type. If the
power source is 120V AC, use a power cord that has UL and C-UL
approvals. If the power source is a 240V AC supply, use the tandem
(T blade) type attachment plug with ground conductor power cord that
meets the respective European country
,
s safety regulations, such as
VDE for Germany.
English
4