RCA RMB-167 - Manual (Page 9)

- - 3
2 SOFTWARE
The RMB-167 board comes with software from Rigel Corporation and third party vendors, whom
we work very closely with. Rigel’s own software for the 166 family may be found on the CD-ROM
in the Rigel Products file, under 166 Software.
2.1 System Requirements
READS166 is designed to work with an IBM PC or compatible, 486 or better, running Windows 95
or Windows NT.
2.2 Software Installation, READS166
Place the CD-ROM in your drive. Go to the Rigel Products | 166 Software | READS166 | .exe
program. Click on the exe file and the program will begin to load in your system.
Follow the standard install directions answering the questions with the appropriate answers.
2.3 Third Party Software
A variety of third party software is available on Rigel’s CD-ROM. The software may be found in
the Strategic Partners Folder under Keil, Tasking, and PLS.
Data sheets on the IC’s used on our boards may also be found on Rigel’s CD.
Please note that software updates occur frequently. Please check our web
site (and the third party vendors web sites) occasionally to make sure you
have the most recent versions of the software.