Russound SMS3 - Manual (Page 14)

14
MOD
INPUT
TV OUTPUT
CATV
INPUT
1
R
L
2 1
R
L
2 3 4
CA6.4i NEWMARKET, NH U.S.A.
~110VAC
~220-240VAC
~50-60Hz
400W
VOLTAGE
110V
220-240V
FUSE
F4A
F2A
K EYPAD P ORTS
Z ONE P REAMP
O UTPUTS
1 2 3 4 5 6
O UTPUT T O 8 O HM S PEAKER
1 2 3 4 5 6
~110VAC ~220-240VAC
IR EMITTERS WARNING : SHOCK HAZARD – DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE –
NES PAS OUVRIR.
SERIAL #
MUTE
VARIABLE
FIXED
VARIABLE
FIXED
IN OUT 12V TRIG
S OURCE I NPUTS
LINK
IN OUT
RCA Cable IR Link Cable
IR Link Cable
RCA Cable
Pos (+)
Neg (–)
To LAN
CAi Controller
SMS3 Media Server
IN OUT
LINK
AUDIO OUTPUTS
1394
IR IN
POWER
+12VDC
6A MAX
MOUSE
KEYBOARD
CRT VGA S-VIDEO
COMPOSITE
VIDEO
RS232
INTERFACE
USB 2.0/1.1
LAN SMS3
Smart Media Server
US C
ASSEMBLED IN THE USA
NEWMARKET, NH
REMOTE SENSOR
VOLUME
SOURCE
STORE POWER
CA-LCD2 Speakers
OUTPUT AUDIO
L
AUDIO
R
VIDEO
INPUT
RF Modulator
RF Distribution
Amplifier TV
ZONE 1
RCA Composite
Video Cable
RCA
Coaxial
Cable
(RG6)
RCA Coaxial
Cable (RG6)
INSTALLATION OPTIONS
CAi WITH RF MODULATED DISTRIBUTED VIDEO SIGNAL
In multi-source, non-video distribution systems such as
the CAi or A-BUS, the SMS3’s three streams are con-
figured as three sources. To distribute the video sig-
nal, an RF modulator and RF distribution amplifier may
be used as an alternate means of distributing video to
each room in the system.
The composite video out of the SMS3 is supplied to
an RF modulator to convert the signal to a specific
channel which the television tuners throughout the
home can receive, just like a TV station. An RF distribu-
tion amplifier will accept the RF modulator’s output,
amplify and distribute it to multiple outputs that can be
wired to each television through a coaxial cable such
as RG6. The television will need to be tuned to the
channel that the RF modulator is set for in order to
see the composite video signal output of the SMS3.
CAi Installation with RF Modulator
1. Using the three RCA cables, connect the SMS3
three source outputs to the controller amplifier source
inputs.
2. Using the IR link cable, connect the controller ampli-
fier’s IR emitter port to the SMS3 IR in port.
3. Using a straight-through Ethernet RJ-45 CAT-5 patch
cable, connect from the SMS3 LAN port to an open
port on the network router.
4. Using a composite video cable, connect the SMS3
composite video port to the RF modulator video input.
5. Using coaxial cable (RG6), connect the RF modula-
tor’s video output to the RF distribution amplifier modu-
lator input.
6. Using coaxial cable (RG6), connect the RF distribu-
tion amplifier modulator’s TV output to the television’s
cable/antenna input.
CAi Controller With RF Modulated Distributed Video Signal