Radio Shack DVD / VCR - Manual (Page 15)

– 15 – EN
D
VD Functions
Paused and Step-by-Step Playback
Press [PAUSE k k ] during playback.
To continue playback, press [PLAY B
B
].
The disc goes forward by one frame each time [PAUSE k
k
] is
pressed during the pause mode.
To continue playback, press [PLAY B
B ].
DVD-V DVD-V
DVD
CD CD CD DVD-V DVD-V
Fast Forward/Reverse Search
Press [h h ] or [g g ] repeatedly during playback
to select the required forward or reverse speed.
To continue playback, press [PLAY B
B ].
DVD
CD CD CD DVD-V DVD-V
Playback
POWER
DISPLAY VCR DVD PAUSE
SLOW
VCR/TV
SKIP/CH.
PLAY
STOP
REC/OTR
MENU ENTER
OPEN/CLOSE
/EJECT SPEED AUDIO
1 2 3
4 5 6
7 8 9
0 +10
1 1 2 2
3 3
1 1
PLAY
4 4
3 3
1 1
DVD Functions
4 4
STOP
POWER OPEN/CLOSE
/EJECT
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Press [K
K / L L / s s / B B ] to select an item, then
press [ENTER] (or [PLAY B]).
Calling up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Resume
Press [STOP C C ] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
DVD
CD CD CD DVD-V DVD-V
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON
E 1
DVD
CD CD CD DVD-V DVD-V
Hint Hint
• A “prohibited icon” may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this unit.
• Some DVDs may be played from title 2 or 3 due to specific pro-
grams.
• During the playback of a two-layered disc, pictures may stop for a
moment. This happens while the 1st layer is being switched to the 2nd
layer. This is not a malfunction.
Hint Hint
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the
pause mode are blurred. (Refer to pages 20-21.)
Hint Hint
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8), 3(1/2).
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to pages 20-21.)
Zoom
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom
factor: x2, x4 or OFF.
3) Press [K / L / s / B] to slide the zoomed picture across
the screen.
4) To exit zoom mode, press [ZOOM] to select OFF.
DVD
DVD-V DVD-V
Before: Turn on the TV, amplifier and any other components which are connected to this unit. Make sure the TV and audio
receiver (commercially available) are set to the correct channel.
x2 x4
Insert a disc with
label facing up.
TIP:
You can change the on-screen language for DVD function in
“PLAYER MENU” setting. (Refer to page 20.)
Slow Forward/Slow Reverse
Press [h h ] or [g g ] repeatedly during the pause
mode to select the required forward or reverse speed.
To continue playback, press [PLAY B
B ].
DVD
DVD-V DVD-V
1
Hint Hint
• For DVDs, fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50), 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8), 3(x30).
Hint Hint
• To cancel resume, press [STOP C] one more time during the Stop
mode.
• The resume information stays on even when the power is turned off.
Hint Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for details.
Hint Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE F], [D] or
[E] repeatedly in the zoom mode.
• In the zoom mode, it automatically changes x2(x4) to the
zoomed position guide.
POWER
OPEN/CLOSE
VCR DVD CHANNEL OUTPUT VIDEO L - AUDIO - R
STOP/EJECT PLAY STOP PLAY
REC/OTR E REW
P / A
A
L K
O
F.FWD D
P O
1 1 3 3 4 4 2 2 1 1
To start
playback To stop
playback
Operations described after this section are mainly based on the remote control use. Some operations can be carried out on main unit.