RocketFish RF-700WPS2 - Manual (Page 6)

6
• The 6-pin +12V power connector(s) to the PCI-E graphic card(s).
6 Close your computer case.
7 Connect the power cord to the power supply.
8 Switch the I/O switch to I.
9 Turn on your computer.
Troubleshooting
If the power supply fails to function correctly, check the following:
• Make sure that the power cord is plugged into a powered electrical
outlet.
• Make sure that the power cord is plugged into the power supply.
• Make sure that the I/O switch is in the I position.
• Make sure that all power connectors are connected to the motherboard
and devices correctly.