Turning v-link on/off controllers used with v-link – Roland SD-50 User Manual
Page 82
82
About V-LINK
1.
Press the [V-LINK] button.
The button will light, and the following screen will appear.
fig.screen_vlink.eps
V-LINK will turn on.
When the V-LINK button is on, the video can be controlled in tandem with operations of the SD-50.
2.
Press the [V-LINK] button once again.
The V-LINK button will go out, and V-LINK will turn off.
Turning V-LINK On/Off
Controllers Used with V-LINK
Button operation
V-LINK function
Transmitted MIDI message
Press the [TEMPO] button
Switch images (switch clips)
C0 00
Press the [KEY CTRL] button
Switch images (switch clips)
C0 01
Press the [MINUS ONE] button
Switch images (switch clips)
C0 02
Press the [
] button
Switch images (switch clips)
C0 03
Press the [
] button
Switch images (switch clips)
C0 04
Press the [
] button
Switch images (switch clips)
C0 05
Press the [
] button
Switch images (switch clips)
C0 06
Press the [
] button
Switch images (switch clips)
C0 07
Press the [PART] button and then
turn the [VALUE] dial
Control the image Image Bank Select
B0 00 00–13
Press the [INST] button and then
turn the [VALUE] dial
Control the image Color Cr Control
B0 47 00–7F
Press the [PLAYER] button and
then turn the [VALUE] dial
Control the image Playback Speed
E0 00 00–40 00–7F 7F
-8192–0–8191
SD-50_e.book 82 ページ ２０１０年１月２５日 月曜日 午前１０時５２分