Mouse led status, Setting up the mouse, Installing the battery – RocketFish RF-NANOMSE2/RF-NANO11/12/13 User Manual
Page 6: Mouse led status setting up the mouse, 6mouse led status
Advertising
6
Mouse LED status
The following table lists the status of the mouse LED and its
descriptions:
Setting up the mouse
Installing the battery
To install the battery:
1
Press the tab on the battery compartment cover, then lift the cover away
from the mouse.
LED
Color
Description
Mouse LED
Green
If the battery voltage is greater than 1.1V, the LED will show green
for three seconds then turns off.
Flashing red
If the battery voltage is less than 1.1V, the LED will flash red for one
minute, then turn off.
Off
If the battery voltage is less than 1.0V, the LED will be off and the
mouse will not work.
RF-NANOMSE2_10-0681_MAN_V1.fm Page 6 Tuesday, June 29, 2010 4:35 PM
Advertising