Aux jacks, Digital out connectors – Roland VS-880EX User Manual
Page 159
5. “MasterLevel=” appears in the display. Use the
TIME/VALUE dial to adjust the volume of the
sound that is output from the MASTER jacks. This
value is linked with master fader on the top panel.
6. Press PARAMETER [
].
7. “Master Bal=” appears in the display. Use the
TIME/VALUE dial to adjust the left/right balance
of the sound that is output from the MASTER
jacks.
8. Press [PLAY (DISPLAY)].
Return to Play condition.
AUX Jacks
1. Hold down [SHIFT] and press [EDIT (FADER)].
2. Press PARAMETER [
] [
]o let “AUX
Out =” appears in the display.
3. Determine what is to be output from the AUX
jacks by rotating the TIME/VALUE dial.
AUX Out
This selects what sounds are heard through the AUX
jacks.
AUX:
The sounds assigned to the AUX bus.
FX1:
The sounds assigned to the (FX1) EFFECT bus.
FX2:
The sounds assigned to the (FX2) EFFECT bus.
4. Press PARAMETER [
].
5. “AUX Level=” appears in the display. Use the
TIME/VALUE dial to adjust the volume of the
sound that is output from the AUX jacks. This
value is linked with AUX SEND knob on the top
panel.
6. Press PARAMETER [
].
7. “AUX Bal=” appears in the display. Use the
TIME/VALUE dial to adjust the left/right balance
of the sound that is output from the AUX jacks.
8. Press [PLAY (DISPLAY)].
Return to Play condition.
DIGITAL OUT Connectors
1. Hold down [SHIFT] and press [EDIT (FADER)].
2. Press PARAMETER [
] [
] to let
“DigitalOut1=” appears in the display.
3. Determine what is to be output from the DIGI-
TAL OUT1 connectors by rotating the
TIME/VALUE dial.
DOUT1 (DIGITAL OUT1)
This selects what sounds are heard through the DIGI-
TAL OUT1 (coaxial) connector.
MST:
Same sound as is heard from the MASTER
jacks (MIX bus).
AUX:
The sounds assigned to the AUX bus.
FX1:
The sounds assigned to the (FX1) EFFECT bus.
FX2:
The sounds assigned to the (FX2) EFFECT bus.
1-2:
The sounds assigned to the Tracks 1–2.
3-4:
The sounds assigned to the Tracks 3–4.
5-6:
The sounds assigned to the Tracks 5–6.
7-8:
The sounds assigned to the Tracks 7–8.
4. Press [PLAY (DISPLAY)].
Return to Play condition.
* The DIGITAL OUT2 (optical) connector is set in the
same way. In this case, make the display read
“DigitalOut2” in step 2.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
AUX Out (In the example, AUX)
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Digital Out 1 (In the example, MST)
Chapter 12 Other Convenient Functions
159
Chapter 12