RocketFish RF-2990 - Manual (Page 7)

5 RF-2990
Connecting to a second audio device
The auxiliary input jack lets you connect a second audio source to
your speakers. For example, if your speakers are connected to your
computer and you want to connect your MP3 player. This second
source will override your computer connection while it’s plugged in.
To connect a second audio source:
• Plug a cable from the second audio source into the headphone output
jack on the second audio source, then plug the other connector into the
3.5 mm AUX Input jack on the right speaker.
Using the microphone pass-through connection
This feature lets you connect a microphone to the speaker and have
the audio input go to your computer. This pass-through feature is the
same as connecting a microphone directly to your computer.
To use the microphone pass-through connection:
• Plug a microphone cable into the microphone input jack on the side of
the right speaker, then connect a cable from the MIC OUT jack on the back
of the right speaker to the microphone jack on the computer.