Renesas HEW Target - Manual (Page 7)

HTS Demo Kit V1.0 7/ 20 December 2007
5.1. Host Computer Requirements
The minimum requirement to be able to use the software that comes with the HTS Demo Kit is a PC with
a USB port and Microsoft Windows XP or Vista.
5.2. HTS Demo Kit Board
The HTS Demo Kit board provides an evaluation and development environment for the M16C family
MCUs. See section “6.0 Hardware” for more details.
5.3. Software Development Tools
The installer program installs all the development tools. For details on installation, see the QuickStart
Guide. A brief description of all the included tools follows. Please refer to the individual tool manuals for
detailed information.
5.3.1. HEW (High-performance Embedded Workshop)
HEW provides a Graphical User Interface (GUI) that integrates the software development tools and
includes the C-compiler, assembler, linker, debugger and editor.
5.3.2. NC30WA Evaluation Version C Compiler
The evaluation version of the M3T-NC30WA C-compiler is provided with the same functionality as the
commercial version except that link size will be restricted to 64 kBytes after 60 days from when you
begin using the compiler. Contact your local sales representative if you wish to purchase a full license.
5.3.3. HEW Debug Interface
HEW communicates with a kernel (i.e. a ROM monitor program) on the target MCU through the ICD.
This debug interface provides a highly efficient evaluation environment. Features include:
• Source-level debugging for assembly and C language
• Single-step command (unlimited breakpoints)
• Run command with 6 breakpoints* for the M16C/26A
• RAM monitor function
• C variable “watch” window
*Note: The number of breakpoints will vary depending on the M16C Flash MCU used.
5.3.4. Flash Development Toolkit
The Flash Development Toolkit Programmer application provides In-System Programming capability
for the starter kit or any target board using an M16C family Flash MCU (e.g. R8C, M16C, M32C).
Please see the Flash Development Toolkit User Guide for more details.