Robic SC-587 - Manual (Page 2)

(D) CHANGING MODES
2
National Electronics & Watch Co., Ltd. and it may NOT be used,
National Electronics & Watch Co., Ltd.
copied or distributed except with authorization in writing from
The enclosed design is proprietary intellectual property owned by
Press S3 to change modes. The sequence is as follows:
(E) HOW TO SET NORMAL TIME AND DUAL TIME
NORMAL TIME
ALARM
SPORT TIMER
CHRONOGRAPH
S3
S3
S3
S5
S4
S3
S5
S4
S3
S1
S2
S2
DUAL TIME
Press and hold
2-3 seconds
S3
S1
S2
- Press S3 to show Normal Time mode (T1) or Dual Time mode (T2). “TIME” will be
displayed for 1 second.
- Press and hold S2 for 2-3 seconds to select Normal Time mode or Dual Time mode.
- Press and hold S4 for 3-4 seconds to enter the setting mode. The second digits start flashing.
- With each press of S1, the selected digits, weekday or 12H/24H, can be adjusted. They will appear flashing.
Press and hold S1 for rapid digit advance.
- Press S3 again. Next digits, weekday or 12H/24H functions can be selected for setting. The sequence is
as follows :
SECOND HOUR MINUTE YEAR
S3 S3 S3
- When setting seconds, pressing S1 while the second digits count between 30 to 59 will reset the second
MONTH DAY WEEKDAY
S3
S3 S3 S3
S3
12H/24H
digits to 00 and 1 will be added to the minute digiits.
- Year can be set from 1990 to 2089.
- When setting 12H/24H, press S1 to select either 12-hour or 24-hour display formats. If 24-hour display format
is selected, there will be no PM flag “P”.
- After all adjustments are completed, press S4 to exit the setting mode.
Notes:
1. Normal Time mode (T1) and Dual Time mode (T2) count up individually with the same second.
2. When Normal Time mode (T1) is displayed, press and hold S2 for less than 2 seconds to view
the dual time without changing the mode.