RocketFish RF-SH230 - Manual (Page 15)

15 RF-SH230
Resetting your headset
Should your headset stop responding, try plugging it into
the power supply for a few seconds. Your headset should
function again as normal.
Using the menus
To activate the extended menu functions:
• Press the Vol+ [9], Vol– [3] and multi-function [1] buttons
until you hear a series of four ascending beeps.
To return to the main menu:
• Press the Vol+ [9], Vol– [3] and multi-function [1] buttons
until you hear a series of four ascending beeps.
Note: All extended menu function settings will be lost.
Main menu
How to... Action Headset response
Turn the power on. With the headset off, press and hold
the multi-function button for three
seconds. Headset turns on and indicator flashes
green.
Turn the power off. With the headset on, press and hold
the multi-function button for three
seconds. Indicator flashes green three times
every second for two seconds, then the
headset turns off.
Increase the volume. With the headset on or during a call,
press the Vol+ button repeatedly. Every press you hear a beep with a
higher volume and higher tone.
Decrease the volume. With the headset on or during a call,
press the Vol– button repeatedly.
Every press you hear a beep with a
lower volume and lower tone
Enter pairing mode. With the headset off, press and hold
the multi-function button for five
seconds. See the pairing instructions
of your mobile phone. Headset indicator flashes green twice
every second and you will hear a series
of high tones.