Rosen Entertainment Systems T12 - Manual (Page 20)

22
Rosen T10/T12 Owner’s Manual
DVD TYPICAL SETUP AND CONFIGURATION
The following section explains how to customize various features of the
Internal DVD Player, including various language, display, and parental
control features.
Note: Some DVD menu settings do not apply to this system,
since it is specifi cally engineered for automotive use. Changing
the state of some settings can cause apparent system failure.
Don’t change any settings other than those described in this
section. If you have questions about the original state of any
DVD setting, please see the list on page 26.
To change the settings for the internal DVD player:
1 Press SETUP.
2 Use the Up and Down navigation buttons to highlight a selection.
3 Press
the ENTER button to confi rm your selection
AUDIO SETUP
GENERAL SETUP
SPEAKER SETUP
PREFERENCES
EXIT SETUP
SETUP MENU -- MAIN PAGE
Try to perform an action that is not permit-
ted or not permitted while a disc is playing,
this on-screen symbol will appear:
Note: To access the Preferences page, you must com-
pletely stop playback of any loaded disc, or eject the disc
completely.
Changing the Aspect Ratio Mode
This is under the GENERAL SETUP tab,
under TV DISPLAY. The correct setting is
WIDE. Changing this setting to NORMAL/
PS or NORMAL/LB will result in distorted
video.
Changing the Video Output Mode
To change the video output mode, select
PREFERENCES, and then select TV
TYPE. The default is NTSC. If you want to
be able to play PAL discs on your NTSC
monitors, select PAL. If you change this set-
ting and the picture “rolls”, see your Rosen
dealer.
Note: The setting “AUTO” will automatically output NTSC
video from NTSC discs, and PAL video from PAL discs.
NTSC is the North American standard. Some discs may
not play properly when AUTO is selected.