Radio Shack P20LCDD - Manual (Page 20)

- 19 -
9.2.2 AUDIO SETUP
The audio setup options are illustrated below:
‹ Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio output
mode you prefer. Press Enter to confirm; There are 3 optional audio output modes: ANALOG,
SPDIF / RAW, and SPDIF/ PCM.
z ANALOG: From the Coaxial Output jack and the Optical Output jack, no signal is
output.
z SPDIF/ RAW: Choose this setting if your DVD player is connected to a power
amplifier with a coaxial cable or an optical cable; When playing a disc recorded with
Dolby Digital, DTS and MPEG audio formats, the corresponding digital signals will be
output from the Coaxial Output jack or Optical Output jack. This player’s digital output
jacks are designed for a connection to a Dolby Digital, DTS , or MPEG receiver or
decoder.
z SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-channel
digital stereo amplifier; When playing a disc recorded with Dolby Digital and MPEG
audio formats, audio signals will be modulated into a 2-channel PCM signal, and it will
be output from the Coaxial Output jack or Optical Output jack.
Notes:
AUDIO OUT function be same with coaxial/optical model only..