RocketFish RF-WTRMS - Manual (Page 5)

5 RF-WTRMS
To remove the receiver from the mouse:
1 Pull the receiver away from the receiver holder.
2 Press the receiver holder into the mouse, then slide the
receiver lock against the holder to lock it into place.
Connecting the receiver to the computer
To connect the mouse receiver to the computer:
• Plug the USB receiver into an available USB port on your
computer. The receiver’s LED turns red, and your
computer identifies the receiver and begins installing the
default driver.
Important: If a message or dialog box appears on the
screen, follow the on-screen prompts to complete the driver
installation.
Receiver holder
Receiver
Receiver holder
Receiver lock
RF-WTRMS_08-1739 ENG.fm Page 5 Thursday, October 16, 2008 2:51 PM