Raymarine Chartplotter - Manual (Page 23)

2-4 RayChart 420/420D Chartplotter
2. Press trackpad left/right to highlight SYSTEM SET UP and press ENTER
to display the System Set Up menu.
3. Use trackpad up/down to highlight the SIMULATOR option .
4. Use trackpad left/right to select ON.
5. If necessary, use trackpad up/down to highlight, in turn, the SIMULATED
SOG and COG options and trackpad left/right to set as required . These set
Speed in 1Kt intervals and Course in 1° intervals, respectively.
6. Press CLEAR twice to return to the chart screen.
2.4 Controlling the display
This section describes how to:
• Change the display mode.
• Move around the chart by panning the display, changing the chart centre and
changing the chart scale.
Selecting the display mode
Use the PAGE key to select the display mode. Select the following modes by
repeat presses of the PAGE key as listed below and shown in the following
illustration:
• Set Up functions (see Chapter 4)
• Course Deviation Indicator (CDI)
• Bearing & Distance Indication (BDI)
• Waypoint data
• Navigation data
• Time/Date data
• Return to Set Up functions
Note: Press GOTO to return to normal Chart display at any time.