Preparation, Connecting to ac power, Installing back-up batteries – Radio Shack AM/FM PLL CLOCK/TABLE RADIO 12-1632 User Manual

Page 3

Advertising
background image

3

PREPARATION

CONNECTING TO AC
POWER

Plug the clock radio’s power cord into a
standard AC outlet. The display turns on
and the BATTERY SENTINEL indicator
lights. (See “Installing Back-Up Batteries.”)

Caution: The clock radio’s AC power cord
is equipped with a polarized plug to pre-
vent electric shock. One blade on the
cord’s plug is wider than the other and the
plug only fits an outlet one way. If you can-
not easily insert the plug, turn it over and
try again. Do not force it.

INSTALLING BACK-UP
BATTERIES

To keep the clock running for up to 8 hours
during an AC power failure, install three
AA batteries (not supplied) in the battery
compartment. For the longest life, we rec-
ommend alkaline batteries.

Caution: Use only fresh batteries of the
required size and recommended type.

Note: To prevent unnecessary drain on
the battery, connect AC power

then install

the batteries.

Follow these steps to install back-up bat-
teries.

1. Slide the battery compartment cover

in the direction of the arrow and
remove it.

2. Place the batteries in the compart-

ment and on top of the attached rib-
bon, as indicated by the polarity
symbols (+ and –) marked in the com-
partment.

3. Replace the cover.

The BATTERY SENTINEL indicator lights
if the back-up batteries are not installed or
need to be replaced.

Warning: Always dispose of old batteries
promptly and properly. Do not bury or burn
them.

12-1632.fm Page 3 Wednesday, May 10, 2000 10:57 AM

Advertising