RCA ANT751 - Manual

ANT751
Outdoor Antenna
User’s Guide
Step 1: Unpack
Remove the antenna and the hardware bag from package. Make sure the
following parts are in the package:
• Antenna
• Mounting pipe and foot
• Hardware bag
U-Bolt (2) 10/32” Hex nuts
Mast Clamp Insert (5) 1/4” Hex Nuts
(2) Black Plastic Plugs (2) 5/8” Bolts
Matching Transformer 2 1/2” Screw
(4) 7/16” Washers
Starting from the rear of the antenna, unfold
the elements on both the top and bottom of the
antenna until they lock into place (as illustrated
below). Make sure the elements are flat and
parallel to each other when you’ve finished.
BEFORE YOU START!!!
Please read the IMPORTANT SAFETY INFORMATION sheet
included in this package.
Step 2: Unfold the antenna’s elements
Rear