Radio Shack 65-717 - Manual (Page 6)

65-717
09A01
Printed in China
RadioShack Corporation
Fort Worth, Texas 76102
3. Select Synchronize with Organizer from
the File menu, or click the Synchronize
button.
4. Select Change Port to access COM
options. COM 1 is configured as the
default communication port for
synchronization with the organizer.
To change the COM port, select Change
Port then select COM 1–4. Unavailable
ports appear in grey.
5. Click Test to determine port availability.
6. Click Synch Options to select:
Synch — When the same record is
changed or deleted on both the PC and
the organizer, the result is determined by
the synchronization options setting:
• Keep Databank version: The
organizer version of the record
replaces the PC record. If the
organizer record is deleted, the PC
record is also deleted. This is the
default setting.
• Keep PC database version: The PC
version of the record replaces the
organizer record. If the PC record is
deleted, the organizer record is also
deleted.
• Keep both versions: Both the PC and
organizer versions are saved. If the
record was changed on both the
organizer and the PC, the organizer
record and PC record will be treated
as separate records for future
synchronizations, even if they were
edited to contain exactly the same
information. If one version of the
record was deleted and the other was
changed, the changed record is saved
on both the PC and organizer.
Backup — To back up all the data in the
organizer to a data file in the PC, select
Backup . Use this option when you create
a new file on the PC and want to backup
the organizer data to this new file. Any
existing PC data is deleted and replaced
by the organizer data.
Restore — Select Restore to transfer all
the data stored in the PC to the Orga-
nizer. Any existing organizer data is
deleted and replaced by the PC data.
7. Press PHONE on your organizer.
8. Press LINK on your organizer.
IOD9>HED?P7J?ED IOD9>HED?P7J?ED IOD9>HED?P7J?ED IOD9>HED?P7J?ED
appears.
Notes:
• If an error occurs during the transfer,
(5525 (5525 (5525 (5525
appears. Repeat Steps 3–8.
• When the record transfer to the
organizer is complete, the organizer
pauses to update its records, then the
normal display appears.
• When using the Restore option, wait for
the exporting dialog box to close before
pressing
LINK on the organizer.
%#4'
Keep the organizer dry; if it gets wet, wipe it
dry immediately. Use and store the organizer
only in normal temperature environments.
Handle the organizer carefully; do not drop it.
Keep the organizer away from dust and dirt,
and wipe it with a damp cloth occasionally to
keep it looking new.
Modifying or tampering with the organizer’s
internal components can cause a malfunction
and might invalidate its warranty and void
your FCC authorization to operate it. If your
organizer is not performing as it should, take
it to your local RadioShack store for
assistance.
Notes:
• At very low temperatures, the display’s
response time might slow down or the
display might fail completely. This is only
temporary. The organizer works normally
again when it returns to a normal
temperature.
• If the organizer is exposed to strong
static electric charges, the display might
become dim or the organizer might fail to
operate properly. If this happens, reset
your organizer (see “Resetting the
Organizer” on Page 6).
4
'2.#%+0)
"
6*'
"$
#66'4+'5
Caution: To avoid losing stored data be sure
to turn off your organizer when replacing the
battery.
Your organizer comes with two 3V CR2032
lithium batteries for power.
When the display dims or the organizer stops
working properly, replace the batteries. For
the best performance and longest life, we
recommend RadioShack batteries.
Warning:
• Keep button-cell batteries away from
children. Swallowing a button-cell battery
can be fatal.
• Dispose of old batteries promptly and
properly. Do not burn or bury them.
Cautions:
• Use only fresh batteries of the required
size and recommended type.
• Do not mix old and new batteries,
different types of batteries (standard,
alkaline, or rechargeable), or
rechargeable batteries of different
capacities.
1. Press ON/OFF to turn off the organizer.
2. Slide the battery compartment cover in
the direction of the arrow to remove it.
3. Use a pointed object, such as a
straightened paper clip or the end of a
screwdriver, to gently pry out the
batteries, then install the new ones with
the positive (+) sides facing up.
4. Replace the cover.
Note: After replacing the batteries, reset the
time, date and daily alarm, as necessary.
4
'5'66+0)
"
6*'
"1
4)#0+<'4
If the organizer stops operating properly or
you forget your password, you might need to
reset it. Follow these steps to reset the
organizer and clear all the stored information
in the organizer.
1. Press ON/OFF to turn off the organizer.
2. Slide the battery cover off in the direction
of the arrow to remove it.
3. Use a pointed object, such as a
straightened paper clip, to press RESET .
5(6(7"+<21, 5(6(7"+<21, 5(6(7"+<21, 5(6(7"+<21,
appears.
4. Press Y to reset the organizer. The
factory installed date and place appear.
All the information stored in the
organizer’s memory is cleared.
Otherwise, press any key except
Y to
cancel.
5. Reset the date, time, and any alarm
settings, as necessary.
52'%+(+%#6+105
Power Source: ................................. 2
×
3V Lithium
CR2032 batteries
Battery Life ................................... About 6 months
Automatic Power-Off ................... About 7 minutes
Working Temperature .... 32° to 104°F (0° to 40°C)
Dimensions (HWD) ................ 3 1 / 8
Ч 5 5 / 16
Ч 9 / 16 in
(79
Ч
135
Ч
14 mm)
Weight (with Batteries) .................. 3.75 oz (105 g)
Specifications are typical; individual units might
vary. Specifications are subject to change and
improvement without notice.