Raymarine Pathfinder Radar Scanner - Manual (Page 54)

26 Pathfinder Radar Scanners
1 Securing nut 2 Gland 3 Grommet 4 Inter-unit cable 5 Eight-way plug 6 Eight-way socket 7 Power
cores (2 or 4) 8 Terminal clamp 9 Screwdriver 10 Earthing clamp 11 Top clamp 12 Clamp screws
6. Slide the gland nut (1) and grommet (3) onto the inter-unit cable (4) and insert
the cable, still covered by its protective sleeve, through the gland.
7. Carefully cut and remove the protective sleeve to expose the 8-way plug (5)
and power cores (7). Place the cable in the earthing clamp (10), ensuring that
the exposed wire braid sits in the earthing clamp.
8. Connect the 8-way plug (5) to the connector (6). The correct fitting is with the
small arrow marked on the body of the plug facing upwards and to the left
hand side. The grey wire will then be at the left hand side and the white wire
will be at the right hand side.
D3230-5
4 10
11 12
White wire
2
3
1
10
11
12
5
6
7
8
9
4