Regency Panorama P48 - Manual

P48 Zero Clearance Direct Vent Gas Fireplace
Model P48-NG2 P48-LP2
Fuel Type Natural Gas Propane
Minimum Supply Pressure 5” W.C. (1.25 kPa) 12” W.C. (3.00 kPa)
Manifold Pressure - High 3.8” W.C. (0.95 kPa) 11” W.C. (2.74 kPa)
Manifold Pressure - Low 1.1” W.C. (0.27 kPa) 3.3” W.C. (0.82 kPa)
Orifi ce Size #27 DMS - 0-4500ft #47 DMS
Minimum Input 29,000 BTU/h (8.49 kW) 26,000 BTU/h (3.07 kW)
Maximum Input 51,000 BTU/h (14.94 kW) 48,000 BTU/h (6.30 kW)
Vent Sizing 5” Inner / 8” Outer 5” Inner / 8” Outer
A
B
A
D C
F
E
G
H
I
K
J
L
O P
N
M
11" (279mm)
dia. Hole through
wall Vent.
Opening for gas
connection
Top Header
Drywall
(or other
facing)
P48 Gas Fireplace
Unit Dimensions Description P33
A Front Face Width 48” (1219mm)
B Rear Firebox Width 34-1/2” (876mm)
C Front Face Height 41” (1041mm)
D Height w/ Standoff 47” (1193mm)
E Unit Depth 23-1/4” (324mm)
F Firebox Height 40” (1016mm)
Framing Dimensions Description P33
G Framing Width 48-1/2” (1232mm)
H *** Framing Height *** 47-1/2” (1207mm) ***
I Framing Depth
29-3/4” (756mm) Vertical Rise
26-1/4” (667mm) No Vertical Rise
J Corner Wall Length 57-5/8 ” (1464mm)
K Corner Facing Wall Width 81-1/2” (2070mm)
L Framed Chase Ceiling
N/A - Vertical Rise
50” (1270mm) No Vertical Rise
M Vent Centerline Height 43” (1092mm)
N Gas Connection Height 2” (51mm)
O Gas Connection Inset 3-3/4” (95mm)
P Gas Connection Width 5” (127mm)
Approved Venting Systems
Flex Vent Systems: FPI AstroCap™ Flex Vent
Rigid Pipe Vent Systems: Simpson Dura-Vent® Direct Vent GS
*** Important: Framing height requires consideration of the hearth
depth. Dimension H = H + the thickness of installed hearth.
Please refer to Page 11 (Exterior Vent Terminations)
for additional guidelines on vent locations.
61 June 2007 Regency Product Specifi cations Book
Gas Fireplaces
Gas Fir
eplaces