RSA Lighting AR70 - Manual

DESCRIPTION Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
Separate Wiring Compartment
18” flexible conduit
4.65”
27.87”
28.70”
29.37”
30.67”
7.95”
9.27”
6.15”
4.65”
1.60”
9.25”
24.66”
7.45”
Required
above
ceiling
45º x 45º
Adjust
Double
Gimbal
Integral Low Voltage
Transformers
A ... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder coated
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
the inner hardware of the fixture from sight
below the ceiling. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic or magnetic low voltage
transformers. Transformers and electrical
are mounted in a separate metal enclosure
box attached to the junction box with 18”
of flexible conduit. Transformer enclosure
includes a separated wiring compart-
ment and six knockouts for conduit entry.
Transformer enclosure features perforated
metal door for easy maintenance access
and cooler operation. Entire electrical
assembly (jbox and transformer enclosure)
is removable from the housing for easy
maintenance.
E ... Lamps
Six (6) 12V AR70 lamps mounted in
adjustable double gimbal. Lamp holders
are removable and may be regressed 1”
for additional cut-off. Lamps can accept
up to three optical accessories (i.e. lens
+ hex louver + snoot). 45º x 45º locking
lamp adjustment. Beveled-edge lamp
ring is secured with threadless, bayonet
action. Optional retractable arm is avail-
able for lamp pulldown and extreme
aiming. Double contact bayonet base
sockets included.
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.90” x 28.96”
COMBOLIGHT
®
Next Generation
Recessed
Multi-Lamp Fixture
Six (6) Light
12V AR70
Remodel Housing
w/ 0.75” Trim Flange
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes SIX (6) 12V AR70 lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 022408
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
Configuration
C6
= COMBOLIGHT
Recessed Six (6) Light
Housing
R
= Remodel
C6 R T
Lamp Type / Wattage Label
050A70
= 50 Watt max. AR70 12V
Power Supply
E
= Electronic Low Voltage
Transformer
M = Magnetic Low Voltage
Transformer
Power Supply
Voltage
1
= 120V
2 = 277V
Lamp Mechanism
G
= Double Gimbal
R = Retractable Double Gimbal
Trim Finish
W
= White
B = Black
S = Industrial Silver
Trim Flange
T
= 0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
Finish
W
= White
B = Black
S = Industrial Silver