Ryobi AP13AK User Manual
Page 4
RULES FOR SAFE OPERATION
Page 3
Power
Switch
Table
Extention
Depth Scale
Hand Crank
Stock Rollers
Overload
Switch
Always wear eye protection when operating the
machine.
Check to make sure all holding screws are tight
before starting machine.
Always stop the motor and disconnect from power
source before making any adjustments.
Be sure all guards are in place before operation.
Read owner’s manual thoroughly and familiarise
yourself with the machine before operation.
Do not force work through the machine. Allow the
planer to apply the proper feed rate.
Check feed rollers occasionally to be sure
sawdust and chips are not lodged between any
components. If rollers are not seated firmly, the
feed rolls will not hold timber firmly against the
bed, allowing kickback.
Only plane wood boards.
Use sound timber, with no loose knots and as few
tight knots as possible.
Never stand directly in line with either the infeed
or outfeed sides. Always stand off to one side of
the machine.
Make sure the workpiece is free of from nails,
screws stones and other foreign objects which
could damage the blades.
Make sure the blades are attached correctly as
described in the instructions.
Use caution when handling the blades and
cutterhead assembly. The blades are sharp and
can easily cut your hand.
Allow the cutterhead to reach full speed before
using.