Runco CRYSTAL CX-70DHD - Manual (Page 33)

Installation
CX-70DHD Installation/Operation Manual 19
PRE
L
IMINAR
Y
Mounting the CX-70DHD
on a Wall or Table Stand You can install the CX-70DHD either on a table or other flat surface (using the included
table stand) or on a wall using the optional wall-mounting kit.
Before installing the wall mount or
table stand, place the panel face
down on a soft, flat surface. Place the
protective sheet, which was wrapped
around the panel when it was
packaged, between the screen and
your work surface to avoid scratching
or otherwise damaging the screen
surface.
Table Stand Assembly: Figure 3-3 shows how to assemble the included table stand
and attach it to the panel.