Rhinotek F-4243C - Manual (Page 44)

ASSEMBLY
1625 01/11 Assembly Section 3-10
© 2011 Alamo Group Inc.
ASSEMBL
Y
Installing Manual Canister to Boom Assembly
Refer to Figure 2.
1. Use two 1/4” x 1-1/2”, 1/4” washers, and 1/4-20 nuts to attach canister to bracket.
2. Remove bolts (26) and washers (27 & 28) from cover (30).
3. Using bolts that were just removed, attach bracket and cover to boom assembly.
4. Make sure manual is placed in the canister.
Figure 2: Loader and Boom