Roland SP-303 - Manual (Page 61)

60
Chapter 8. Examples of Using the SP-303
fig.r08-04
15. Starting at the beginning of the next pass, input Pad 5
(chord phrase) at the beginning of every measure.
fig.r08-05
16. Turn off quantization.
Press [QUANTIZE], illuminating the button, then turn
the CTRL 3 knob until “oFF” appears in the display.
Press [QUANTIZE] once more, and confirm that the
button has turned off.
17. Lastly, input Pad 6 (scratch sound) at whatever timing
you like.
The scratch sound is recorded just as played.
fig.r08-06
● If you want to delete any mistaken input, press [DEL]
while the recording is in progress, lighting the button,
then press the pad for the sample you want to delete.
The pad’s sample is deleted for as long as the pad is held
down, and the deletion ends when the pad is released.
fig.r08-07
18. When you have finished recording, press [REC],
causing the light to go out.
The dots blink in the display for a short while, the
process is done.
Never turn off the power while the dots are blinking.
QUANTIZE = 4
Bass Phrase
SNARE SNARE
KICK KICK KICK KICK
QUANTIZE = 4
Chord Phrase
SNARE SNARE
Bass Phrase
QUANTIZE = OFF
SNARE SNARE
KICK KICK KICK KICK
Bass Phrase
Chord Phrase
ERASE
SNARE SNARE
KICK KICK KICK KICK
Bass Phrase
Chord Phrase
Hi-hat throughout this
passage deleted
Pad 3 pressed during this passage