RocketFish RF-BTCMB02 - Manual (Page 18)

18
Installing and using software
Installing the software
To use the keyboard and mouse hotkey buttons, you must install the
software on the included CD.
To install the software:
1 Plug the USB Bluetooth receiver into a USB port on your computer.
2 Insert the included CD in the disc drive. The introductory screen appears
automatically. If the screen does not appear automatically, double-click
the autorun.exe file on the CD.
3 Click Install Driver. The Welcome screen appears.
4 Follow the on-screen instructions to complete the software installation.
Note: If the “Bluetooth device not found” message appears, plug the USB Bluetooth
receiver into a USB port on your computer, then click OK. The Found New Hardware
Wizard starts installing the software.
5 When the installation is complete, click Finish.
To uninstall the Bluetooth stack:
1 Remove the USB Bluetooth receiver.
2 In Windows Vista or Windows 7, click Start, Control Panel, then click Programs
and Features .
Or
In Windows XP, click Start, Settings, Control Panel, then click Add/Remove
Programs
.
3 Click WIDCOMM Bluetooth Software in the program list, then click Uninstall
(Windows Vista or Windows 7) or Remove (Windows XP). A confirmation
message appears.
4 Click Yes to uninstall or No to cancel. When the program has been
removed, a prompt tells you to restart the computer.
5 Click Yes to restart your computer now or No to restart later.