Ryobi RY49701 - Manual (Page 8)

8
FEATURES
Fig. 2
PRODUCT SPECIFICATIONS
Hydraulic Cylinder Pressure................................. 2320 psi
Oil Capacity......................................... 118 oz. (3.7 quarts)
Input ................................120 V, 60 Hz, AC only, 15 Amps
Net Weight`......................................................... 101.4 lbs. Log Capacity Diameter, maximum............................ 10 in.
Log Capacity Diameter, minimum............................... 4 in.
Log Capacity Length .............................................. 20.5 in.
KNOW YOUR LOG SPLITTER
See Figure 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BLEED SCREW
Loosen the bleed screw to ensure the smooth flow of air in
and out of the oil tank.
HYDRAULIC CONTROL LEVER
Push down on the hydraulic control lever and the ram starts
pushing the log into the wedge.
LIFT HANDLE
The lift handle makes rolling the log splitter from one location
to another simple and easy.
RESET/OVERLOAD BUTTON
If the motor is overloaded the machine will shut off. Remove
the load and push the reset/overload button to restart the
machine.
OIL DRAIN BOLT WITH DIPSTICK
Oil drain bolt with dipstick makes checking and changing
hydraulic oil easy.
SIDE SUPPORTS
Side supports on each side of the work table keep logs
resting securely on the log splitter.
WORK TABLE
Provides surface to support log prior to splitting operation.
OIL DRAIN BOLT
WITH DIPSTICK
ON/OFF
SWITCH
HYDRAULIC CONTROL
LEVER
SIDE
SUPPORTS
RAM
WEDGE
BLEED SCREW
WORK TABLE
PUSHBUTTON
BOX