Ricoh Printer/Scanner Unit Type 8000 - Manual (Page 74)

Storing Files Using the Scanner Function
66
3
H
If necessary, specify file information, such as [User Name], [File Name], and
[Password].
For details, see “Specifying File Information for a Stored File”.
I
Press [OK].
J
Press the {Start} key.
If you are scanning batches, place the next originals.
Note
❒ Depending on the security setting, [Access Privileges] may appear instead
of [User Name]. For details about specifying [Access Privileges], consult the
administrator.
❒ By pressing [Send & Store], you can simultaneously store scan files and send
them. For details, see “Simultaneous Storage and Sending by E-mail”, “Si-
multaneous Storage and Sending by Scan to Folder”, and “Simultaneous
Storage and Delivery”.
❒ If a destination or sender has been selected, you cannot press [Store Only].
❒ To cancel scanning, press the {Clear / Stop} key.
Reference
p.109 “Various Scan Settings”
p.120 “Adjusting Image Density”
p.121 “Setting of Original Feed Type”
p.67 “Specifying File Information for a Stored File”
p.34 “Simultaneous Storage and Sending by E-mail”
p.61 “Simultaneous Storage and Sending by Scan to Folder”
p.102 “Simultaneous Storage and Delivery”