ROWENTA Steam 'n Press - Manual (Page 8)

8
Selecting the temperature
˾ Set the thermostat control dial (A) according to the type of fabric
you are ironing. Check the fabric label for the appropriate setting.
Fabric Temperature
regulator
synthetics
nylon ●
polyester (low temperature)
silk ●●
wool (medium temperature)
cotton ●●●
linen (high temperature)
Start at low temperature ● and graduate to
high temperature ● ● ● . For delicate fabrics
we recommend carrying out a test on an
unobtrusive part of the garment (inner
seam). Steam can only be produced when
the thermostat is aligned to
● ● ● setting.
STEAMBRUSH FUNCTION
Using for the first time
When the Steam 'n Press is plugged
in the soleplate heats. Do not touch
or remove the soleplate cover
without letting the soleplate cool
down.
˾ Make sure soleplate cover is securely
in place before using the steambrush
function. Please reference section in
instructions called “Attaching the
Soleplate Cover“.
˾ Plug in your Steam 'n Press and set the
thermostat to the
●●● steam setting.
˾ After approximately one minute it will
reach working temperature.
˾ To begin steaming, press the burst of
steam button 4 to 5 times to prime the
unit.
NOTE: The Steam 'n Press can be used
on virtually all articles of clothing in the
home. Care should be taken when
steaming heat sensitive synthetic materi-
als such as nylon or rayon. We
recommend you test acrylic, nylon or
other synthetic fabrics on an unobtrusive
area to ensure these fabrics are not
damaged by hot steam.
!
m
in
m
in