Rockford Fosgate 2600X - Manual (Page 5)

– 2 –
Series 1 2300
Series 1 2600x
Series 1 4600x
Signal-to-Noise Ratio
Over 105 dB A weighted
Bandwidth
10 Hz to 100 kHz
±
3dB
Damping Factor @ 4
Ω
At output connector - Over 200
Fr
equency Response
20 Hz to 20 kHz
±
0.5dB
IM
Distortion (IHF)
Less than 0.05%
In
put Impedance
20k ohms
In
put Sensitivity
(250 mV - 1 Volt)
P
rotection
Internal analog-computer output protection circuitry limits power in case of overload. Thermal switch shuts down the amplifier in case of overheating.
Crossover Card
N/A
12 dB/octave with selectable High-Pass, Low-Pass and Full Range
Ba
ttery Fusing Rates
10 Amps
20 Amps
30 Amps
(External to Amplifier) Fuse Type
ATC
ATC
ATC
Dimensions
7.9” (20.07cm) W
7.9” (20.07 cm) W
7.9” (20.07cm) W
5.1” (12.95cm) L
6.1” (15.49cm) L
9.1” (23.11cm) L
2” (5.08cm) H
2” (5.08 cm) H
2” (5.08 cm) H
Specifications subject to change without notice.