RCA RD2012 - Manual (Page 16)

EN
Before You Begin
Insert battery into the
player
1. To insert batteries, press the PUSH
OPEN button next to the battery door
to release the lock and lift the door.
2. Insert a “AA”(UM3) battery with
polarities corresponding to the
indications on the compartment.
(Refer to “Before You Begin” for
important battery information.)
3. Close the door to the battery
compartment.
Inserting a SD card /
MultiMediaCard (Optional)
The player has built-in flash memory. To
extend the playtime, you can use the
optional Memory Card slot.
1. Insert a Memory Card into the card slot
on the top of the player when it is off
as illustrated in the diagram below.
2. To remove the card, pull the Memory
Card out when the unit is off.
Note
Refer to the power level indicator on
display for battery level.
Replace with new batteries when the
indicator is empty. Refer to “Display
Overview” on page 11.
Note
Do not remove the Memory Card
during playback or when the power is
on. This may stop the unit from
playing immediately or damage the
memory on the memory card or the
player.
6
MEMORY CARD
Top View
PU SH O P E N