Boat show mode, Heading display damping – Raymarine Autohelm ST 30 User Manual

Page 25

Advertising
background image

ST30 Compass Installation and Operation Handbook

22

Boat Show Mode

This is a programme that simulates heading information for dealer
demonstration purposes.

Cal

LOCK

COMPASS

LOCK

HEADING

AVERAGE

D1852-1

Boat show mode is toggled on (S1) and off (S0) using the

or

key.

Press LOCK to advance to “Heading Display Damping” or exit extended
calibration as described on page 23.

Heading Display Damping

The heading displayed by the ST30 Compass is the average reading taken
from the fluxgate compass. Damping controls the number of readings
used in each averaging calculation. The higher the value displayed at the
damping display the slower the screen update of heading information.

The default value is d4 which can, if so required, be adjusted using the
or

key.

Cal

LOCK

COMPASS

LOCK

HEADING

AVERAGE

D1853-1

Press LOCK to advance to “ Off-Course Bargraph Damping” or exit
extended calibration as described on page 23.

Advertising