Rosewill R700N User Manual
Page 6
Advertising
Section 3 : Installation Guide
Check parts before installing
Each monitor should enclose the following parts. Any assistance
please contact the shop where you bought.
1. Monitor
2. AC/DC Power Adapter
3. AC Power Cable
4. Audio Cable
5. VGA Cable
6. User Manual
How to install Power cable?
1. Plug the AC/DC adapter cable connector into the back of Monitor.
( DC-IN input )
2. Connect the AC power cable and adapter.
3. Connect the VGA Cable to the D-Sub connector in the back of the
monitor.
4. Plug the AC power cable connector into AC power output.
Advertising