Ryobi R10630 - Manual (Page 4)

Page 4
■
REMOVE ADJUSTING KEYS AND WRENCHES. Form
habit of checking to see that keys and adjusting wrenches
are removed from tool before turning it on.
■
NEVER USE IN AN EXPLOSIVE ATMOSPHERE.
Normal sparking of the motor could ignite flammable
liquids, gases, or fumes.
■ KEEP HANDLES DRY, CLEAN, AND FREE FROM
OIL AND GREASE. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-
based products or any strong solvents to clean your
tool.
■ STAY ALERT. Watch what you are doing and use
common sense. Do not operate tool when you are tired.
Do not rush.
■
CHECK DAMAGED PARTS. Before further use of the
tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced by
an authorized service center unless indicated elsewhere
in this operator's manual.
■ DO NOT USE TOOL IF SWITCH DOES NOT TURN IT
ON AND OFF. Have defective switches replaced by an
authorized service center.
■
DRUGS, ALCOHOL, MEDICATION. Do not operate
tool while under the influence of drugs, alcohol, or any
medication.
■
CUTTING INTO ELECTRICAL WIRING IN WALLS
AND FLOORS CAN CAUSE THE BLADE AND METAL
PARTS TO BECOME ELECTRICALLY LIVE. Do not
touch metal parts when cutting into walls and floors;
grasp only the insulated handle(s) provided on the tool.
Make sure hidden electrical wiring, water pipes, and
mechanical hazards are not in the blade path when
cutting into a wall or floor.
■
INSPECT FOR and remove all nails from lumber before
cutting.
IMPORTANT SAFETY RULES FOR BATTERY
TOOLS
■ Battery tools do not have to be plugged into an electrical
outlet; therefore, they are always in an operating
condition. Be aware of possible hazards when carrying
your battery tool, when making adjustments to it, or
when changing accessories.
■
USE ONLY THE CHARGER PROVIDED WITH YOUR
BATTERY TOOL. Do not substitute any other charger.
Use of another charger could cause batteries to explode
causing possible serious injury.
■ DO NOT PLACE BATTERY TOOLS OR THEIR
BATTERIES NEAR FIRE OR HEAT. They may explode.
■ DO NOT CHARGE BATTERY TOOL IN A DAMP OR
WET LOCATION.
■ Your battery tool should be charged in a location where
the temperature is more than 50
°F but less than 100°F.
■
Under extreme usage or temperature conditions, battery
leakage may occur. If liquid comes in contact with your
skin, wash immediately with soap and water, then
neutralize with lemon juice or vinegar. If liquid gets in
your eyes, flush them with clean water for at least 10
minutes, then seek immediate medical attention.
■
If carrying your battery tool at your side, make sure it is
not running and your finger is not on the switch. Avoid
accidental starting.
■
SECURE WORK before applying power. NEVER hold
workpiece in your hand or across your legs.
■
WHEN SERVICING USE ONLY IDENTICAL
REPLACEMENT PARTS.
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER
■
SAVE THESE INSTRUCTIONS. This manual contains
important safety and operating instructions for battery
charger part numbers 1400667 and 1400677.
■ Before using battery charger, read all instructions and
cautionary markings in this manual, on battery charger,
and product using battery charger.
WARNING:
To reduce risk of injury, charge only nickel-cadmium type
rechargeable batteries. Other types of batteries may
burst causing personal injury and damage.
■
Do not expose charger to rain or snow.
■
Use of an attachment not recommended or sold by the
battery charger manufacturer may result in a risk of fire,
electric shock, or injury to persons.
■ To reduce risk of damage to charger body and cord, pull
by charger body rather than cord when disconnecting
charger.
■
Make sure cord is located so that it will not be stepped
on, tripped over, or otherwise subjected to damage or
stress.
■
An extension cord should not be used unless absolutely
necessary. Use of improper extension cord could
result in a risk of fire and electric shock. If extension
cord must be used, make sure:
a. That pins on plug of extension cord are the same
number, size and shape as those of plug on
charger.
b. That extension cord is properly wired and in good
electrical condition; and
RULES FOR SAFE OPERATION (Continued)