RayTek Raynger MX Series - Manual (Page 2)

25mm
@ 0m
1.0"
@ 0"
19mm
@1.15m
0.76"
@ 3'10"
286mm
@10m
11"
@ 32.8'
Temperature range -30 to 900°C (-25 to 1600°F), MX2, MX4, MXCF
-50 to 500°C (-58 to 932°F), MXSZ
Accuracy* ±1% of reading or ±1°C (±2°F), whichever is greater
Repeatability* ±0.5% of reading or ±1°C (±2°F), whichever is greater
Response time (95%) 250 mSec
Spectral response 8 to 14 µm, thermopile detector
Display resolution tenth degree reading up to 900°C (0.2°F to 999.8°F)
Ambient operating range 0 to 50°C (32 to 120°F)
Relative humidity 10-95% RH noncondensing @ up to 30°C (86°F)
Storage temperature -30 to 50°C (-25 to 122°F) without battery
Power 2 AA batteries, DC power for MX4 and MX4+
Tripod mount 1/4-20 UNC
Dimensions 200 x 170 x 50 mm (7.9 x 6.7 x 2 inches)
Weight 480 g (1 lb. 6 oz)
*only at 23°C (73°F)
MX2 MX4 MX4+
Adjustable emissivity ✓ ✓ ✓
On-board emissivity table - ✓ ✓
*16-point laser circle spot; meets IEC ✓ ✓ ✓
Class 2 & FDA Class II requirements
*Single Laser Class III ✓ - -
Audible/visible High alarm ✓ ✓ ✓
Audible/visible Low alarm ✓ ✓
MAX and MIN temperature ✓ ✓ ✓
DIF and AVG temperature - ✓ ✓
Bar graph display ✓ ✓ ✓
Data output: RS232 or - ✓ ✓
1 mV per degree (°C or °F)
100 points of data logging - ✓ ✓
Windows-compatible - - ✓
Data Graphing Software - - ✓
Power Supply (110 or 220V), - - ✓
RS232 Computer Cable, 1.5 m (60 in),
K thermocouple probe
*MX2 available with either 16-point class II, or single point class III laser sighting system.
MX2, MX4, MX4+ and MXSZ
D:S = 60:1 at Focus Point
Target Spot Sizes and Distances
R A Y N G E R M X P O R T A B L E N O N C O N T A C T T H E R M O M E T E R S
F E A T U R E S
S P E C I F I C A T I O N S
■ Windows-based Data Graphing Software* ■ Thermistor (NTC) probe
■ RS232 computer cable* ■ Portable thermal printer
■ Thermocouple K probe* ■ Calibration Certification
■ Plug-in Power Supply (110 or 220V)* ■ Soft pouch
*Standard with Raynger MX4+
O P T I O N S / A C C E S S O R I E S
The rugged, ergonomic MX has many uses:
■ check for hot spots in electrical panels, circuit
breakers, generators, and gearboxes
■ monitor supply and return registers, air stratification,
and duct leakage
■ monitor temperatures of gasoline and diesel
engine cylinders and railroad axles and bearings
■ food preparation and storage
■ Industrial predictive and preventative maintenance.
■ Checking for icing and deicing on planes
and asphalt
■ Checking for depleted refrigeration media
■ Cold storage and walk-in refrigeration applications
■ Frozen food safety and processing
■ ISO 9000 proactive maintenance programs
■ Checking for bearing failures and motor misalignment
■ Power distribution trouble shooting
■ Electrical bench work in the shop or lab
A P P L I C A T I O N S
25mm
@ 0mm
1.0"
@ 0"
6mm
@300mm
0.24"
@ 11.4"
70mm
@1000mm
2.81"
@ 40"
MXCF (Close Focus)
D:S = 50:1 at Focus Point
Raytek, the Raytek logo, and Thermalert are registered trademarks
of Raytek Corporation.
©2001 Raytek Corporation, Printed in USA, 3/01 Rev. A
Specifications subject to change without notice. 3-1022
Worldwide Headquarters
Raytek Corporation
Santa Cruz, CA USA
Tel: 1 831 458 1110
800 866 5478 (U.S. and Canada only)
Fax: 1 831 425 4561
www.raytek.com
5710 Kenosha Street
Richmond, Illinois 60071 USA
Phone: +1 (815) 678-2211
FAX: +1 (815) 678-3961
Internet: www.watlow.com
e-mail: [email protected]
RIC-MX-0401
For Sales and Ordering Contact: For Service and
Warranty Contact:
Your Authorized Watlow Distributor Is: