Rangemaster Toledo 110 Induction Cooker U109948 - 04 - Manual (Page 17)

15
‘Cook & Clean’ Panels
The main oven has side ‘Cook & Clean’ panels which have
been coated with a special enamel that partly cleans itself.
This does not stop all marks on the lining, but helps to reduce
the amount of manual cleaning needed.
These panels work better above 200°C. If you do most of your
cooking below this temperature, occasionally remove the
panels and wipe with a lint free cloth and hot soapy water.
The panels should then be dried and replaced and the oven
heated at 200°C for about one hour. This will ensure that the
panels are working effectively.
Removing the Panels to clean the Enamel
Interior
If you wish to clean the enamel interior of the oven, you will
first need to remove the shelves.
On some models the main oven has a removable oven roof.
Slide the roof liner forwards and remove (Fig.5-3).
Each side of the oven is fixed with four fixing screws. You do
not have to remove the screws to remove the oven panels.
Simply lift each side panel upwards, slide them off the screws
and then pull them forwards (Fig.5-4).
Once the panels have been removed, the oven enamel
interior can be cleaned.
DO NOT use steel wool, oven cleaning pads, or any other
materials that will scratch the surface.
ArtNo.320-0025 - Oven roof -removing
Fig.5-3
ArtNo.320-0008 Removing the oven lining
Fig.5-4