Blackberry 43-492 - Manual (Page 5)

5
MOUNTING THE STATIONS
To mount a station on the wall, you need two screws (not
supplied) with heads that fit into the keyhole slots on the
bottom of the stations.
Follow these steps to mount a station on the wall.
1. Mark the mounting screw locations 2 3 / 4 inches (70
mm) apart, one above the other.
2. Drill a hole at each marked location.
3. Thread a screw into each hole until the screw’s head
extends about 1 /
8
inch from the wall.
4. Align the keyhole slots on the bottom of the station
with the screw heads, then slide the station down to
secure it.
43-492.fm Page 5 Friday, August 13, 1999 10:02 AM