Roberts Radio SRCD970 - Manual (Page 6)

Mixed play
When mixed play is selected the SRCD970 will play all the tracks on the disc
in random order. Press the mix button (10) until the word ‘Mix’ appears in
the display. Press the play/pause button (9) to start the disc playing. The
SRCD970 will now play all tracks on the disc in random order.
Listening to cassette tapes
Slide the Tape/Radio/CD switch (3) to the "Tape" position. Press the stop/
eject button (19) to open the cassette door (24). Insert a pre-recorded
cassette with the tape surface nearest to the cassette keys and the side with
the desired recording facing towards you. Close the cassette compartment.
Depress the play button (22) and adjust the volume control (4) to suit your
personal taste. Use the fast forward (20) or rewind buttons (21) to locate a
specific part of the tape. If you wish to temporarily stop the playback
depress the pause button (18). When you are ready to resume playback
press the pause button a second time. When the end of tape is reached the
SRCD970 will automatically switch off.
Recording from the Radio
Slide the Tape/Radio/CD switch (3) to the "Radio" position. Tune in to the
desired station. Adjust the volume control (4) to suit your requirements.
Insert a blank cassette with the tape surface nearest to the cassette keys.
Depress the record button (23) to commence recording. The recording
level is set automatically and is not affected by the setting of the volume
control. When recording from the MW band a whistle may occur. To remove
the whistle slide the beat cut switch (25) on the rear of the SRCD970 to the
position giving best reception.