About v-link, What is v-link, Connection examples – Roland Fantom-S User Manual

Page 201: Turning the v-link on/off, V-link settings, P. 201)

Advertising
background image

201

About V-LINK

About V-LINK

What is V-LINK?

V-LINK (

) is a function that provides for the play of

music and visual material. By using V-LINK-compatible video
equipment, visual effects can be easily linked to, and made part of
the expressive elements of a performance.

(Examples)

By using the Fantom-S and Edirol DV-7PR together, you can:

• Make Edirol DV-7PR playback settings remotely from the

Fantom-S.

• Use the Fantom-S’s sequencer to enjoy synchronized music and

video.

• Use the Fantom-S’s velocity pads to switch the Edirol DV-7PR’s

images (clips/palettes).

• Use the Fantom-S’s knobs to adjust the brightness or color of the

image.

*

In order to use V-LINK with the Fantom-S and Edirol DV-7PR, you
will need to make connections using an Edirol UM1/UM-1S (sold
separately).

Connection Examples

Before connecting this unit to other devices, turn off the power
to all units. This will help prevent malfunctions and/or damage
to speakers or other devices.

Use a UM-1 to connect the Fantom-S’s MIDI OUT connector to the
DV-7PR’s remote jack.

fig.V-LINK-Connect.e

Turning the V-LINK ON/OFF

1.

In the left of the panel, press [V-LINK] so the indicator is

lighted.

The V-LINK button will light, and the V-LINK setting will be
on.

In this state, you can operate the velocity pads and turntable
emulation slider to manipulate images in sync with the
playback of the Fantom-S.

If you press [EXIT], you will return to the previous screen while
leaving the V-LINK setting on.

Each mode will function as usual even if V-LINK is on.

2.

Press [V-LINK] again.

The V-LINK button will go out, and the V-LINK setting will be
off.

V-LINK Settings

1.

Holding down [SHIFT] and pressing [V-LINK] to access the

V-LINK SETUP screen.

2.

Press [CURSOR] to move the cursor to a parameter, and

turn the VALUE dial or use [INC][DEC] to set the value.

fig.V-LINK01

*

Specify the Pad Mode by pressing [1 (Clip)] or [2 (Palett)].

3.

If you want to keep your settings, press [8 (System Write)].

4.

Press [7 (Exit)] or [EXIT].

You’re returned to the previous screen.

Edirol DV-7PR

Display

Edirol UM-1

Projector

MIDI OUT

REMOTE

Fantom-S

Reference_e.book 201 ページ 2003年7月14日 月曜日 午後3時25分

Advertising