Radio Shack 20-197 User Manual
Page 3
©2008.
RadioShack Corporation.
All rights reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
11A08
20-106/20-197
20–106/20–197 Special Global Menu Information
Menu Name
Menu Help Text
Default
Values
Win500 Name
PSR Edit Name
Setting Type
Description/Notes
SubaudDelay
Delay before we start subau-
dible decode
150
0–65535,
x1 ms
Subaudible start
delay
Delay Time
Motorola Trunking
Length of time to wait to check for Motorola subaudible
data to decode
M36 ET Patt
Mot3600 Endtone 16–bit pat-
tern to detect
2B2B
0x0000–
0xFFFF
Endtone pattern
End Tone Pattern
Motorola Trunking
The Motorola 3600 End Tone 16–bit pattern to detect an
end of signal command
EndtoneMot
# of >baud bits to trig
3600CC analog end
250
0–250
Endtone threshold
End Tone Threshold
Motorola Trunking
The Motorola 3600 End Tone number of bits required to
mute at end of signal
EndtoneEDACS
# of >baud bits to trig
4800CC analog end
10
0–250
Endtone threshold
End Tone Threshold
EDACS Trunking
The EDACS 4800 End Tone number of bits required to
mute at end of signal
EDACS UnMute
EDACS unmute delay
18
0–100,
x10 ms
GCG unmute delay
GCG Unmute Delay
EDACS Trunking
Length of time to wait before unumuting an EDACS trunk-
ing signal
EDACS ET HO
EDACS post end–tone hold-
off
35
0–100,
x10 ms
Endtone holdoff
End Tone Holdoff
EDACS Trunking
Length of time to wait after an EDACS end of signal com-
mand
Trunking Ch#
Show CC Chan # while show-
ing VC
Off
Off/On
Show trunked chan
w/VC
Show Trunking Channel
Misc Setting
Show the trunking channel number on the display
CCDump
Dump CC msgs to PC/IF
No
No/Yes
Dump trunking data
to PC/IF
Enable CC Dump
Misc Setting
Enable the Control Channel Dump feature
DSPDump
Dump CPU<–>DSP msgs to
PC/IF
No
No/Yes
Echo DSP comms to
PC/IF
Enable DSP Dump
Misc Setting
Enable the DSP Dump feature
Abbreviations
CC = Control Channel
CSQ = Carrier Squelch
DG = Digital
ET = End Tone
HD2 = in DG, P25 CC detect, in CTCSS/DCS, reverse
burst/turn off code detect
HD5 = CTCSS/DCS/NAC detect
HW = Hardware
SQ = Squelch
VC = Voice Channel
WX = Weather
XF = IMBE detect
ZM = Zeromatic