Installation, Wiring connections – Roadmaster RMCD100M User Manual

Page 8

Advertising
background image

Installation

5A

1A

Antenna Receptacle

Antenna Cable & Plug

Black: Ground

Blue/White: Auto-Antenna

Yellow: Battery

Red: ACC Power

Front Speaker Out (L)

White (+)

White / Black (-)

Right Front

Left Front

Grey / Black (-)

Grey (+)

Wiring Harness & Plug

Wiring Harness Socket

RCA Line Out

Red = Right

White = Left

WIRING CONNECTIONS

• This unit is designed for use with two
(2) speakers with an impedance be-
tween 4 Ohms to 8 Ohms.

• An impedance load of less than 4
Ohms could damage the unit.

• Never bridge or combine the speaker
wire outputs. When not using four speak-
ers, use electrical tape to tape the ends
of the unused speaker outputs to pre-
vent a short circuit.

• Never ground the negative speaker
terminals to chassis ground.

Follow the above wiring diagram to install the head unit with new or existing
speakers.

Speaker Wiring Notes

7

Advertising
This manual is related to the following products: