RCA MultiMedia Monitor - Manual (Page 13)

Connections & Setup
11
Monitor, VCR, and a Satellite Receiver
1. Connect the coaxial cable carrying your television signal (off air or
cable) to the antenna input on the VCR.
2. Connect a coaxial cable to the VCR’s antenna output and to the
ANTENNA/CABLE INPUT jack on the monitor.
3. Use RCA cables to connect the VCR’s audio/video output to INPUT 1
on the monitor.
4. Use RCA cables to connect the satellite receiver’s audio/video output
to the INPUT 2 input on the monitor. If your satellite receiver has an
S-Video output, you can make the video connection by using the S-
Video jacks instead.
Viewing the Components
1. Turn on the monitor and the component(s) you want to view.
2. Press the TV button on the remote control.
3. Press the INPUT button on the remote control to scroll through the
video inputs.
• The VCR can be viewed on the VID 1 input channel.
• The satellite receiver can be viewed on the VID 2 input.
ANTENNA/
CABLE INPUT
POWER
VIDEO
AUDIO
L R
INPUT 1
INPUT 2
INPUT 3
S-VIDEO
PIP MAIN
S-VIDEO STEREO
OUTPUT
SELECTED OUTPUTS
AUDIO
R
L COMPONENT
Y P B P R
(S)VGA 1
STEREO INPUT
(S)VGA 2
AUDIO INPUTS
L R
AUDIO OUTPUTS
FIXED VARIABLE L R L R
EXT SPEAKERS EXT
INT
L R
+ +
USB
PC/
HUB
DVD COMPONENT INPUT
DIGITAL TV
INPUT DEVICE/
HUB
ANTENNA IN
VIDEO AUDIO L R
ANTENNA OUT
IN
OUT
VCR
VIDEO AUDIO L R
OUT
SATELLITE
RECEIVER
S-VIDEO
VIDEO AUDIO L R
CABLE OFF-AIR ANTENNA
Direct Channel Tuning
You can set up the monitor to
automatically tune to the correct input for
channel. This is called auto tuning. (See
“Setup” for more information.)
2
1
3
4