Customizing the function settings, Maintenance – RCA DRC6389T User Manual

Page 26

Advertising
background image

GB - 24

Use Default Settings

1. Press the SETUP button in stop mode.
2. Press the / button to select Misc.
3. Press the button, then press the / button to select

“Use Default Settings” dialogue box.

4. Press the ENTER button, then press the / button to

select “Yes”.

Press the ENTER button and the original

setting will be restored. The unit will exit setting menu
automatically and re-load the disc in the disc tray.

Note: It will take 3-5 seconds to reset the DVD player to the
factory default.

Screen Saver

1. Press the SETUP button in stop mode.
2. Press the / button to select Misc.
3. Press the button, then press the /

t

c

e

l

e

s

o

t

n

o

tt

u

b

Screen Saver.

4. Press the ENTER button, then press the / button to

change the On/Off mode.

5. Press the ENTER button.
6. Press the SETUP button or RETURN button to exit the

menu.

MISC

CUSTOMIZING THE FUNCTION SETTINGS

Cleaning the Disc

A defective or soiled disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning

cloth.

• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause

malfunctions.

Cleaning the Unit

• Be sure to turn the unit off and disconnect the car power adapter before maintaining the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been

dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe with a dry cloth.

• Never use alcohol, benzine, thinner, cleaning

or other chemicals. Do NOT use compressed air to

remove dust.

Important Note

• Before transporting the unit, remove any disc from the disc compartment.

MAINTENANCE

Do you want to use default setting ?

Advertising