RocketFish SOLACE RF-JJX15 - Manual

Congratulations on your purchase of the Solace ANC headset.
This headset represents the state of the art in headset design
and is designed for reliable and trouble-free performance.
Package contents
• Active noise-canceling headset
• Comply™ Foam Tips and 3 ear bud sizes (S, M, L)
•
USB charging cable
• 3.5 mm adapter for extended compatibility
(with Nokia, Samsung and LG handsets)
• Carry pouch
• Quick Setup Guide
Features
Charging the battery
Connect the USB charger to the headset and to an open USB
port on your computer. Charge the battery for at least two
hours. While the battery is charging, the status indicator lights
red. When the battery is fully charged, the status indicator dims
or turns off.
Note: Charge for two hours before first use (two hours charge will provide
30 hours of playback time with Noise Canceling on).
Using your headset
1 Plug the audio cable into a mobile phone or MP3 player.
2 If you connected your headset to a mobile phone, you will
hear a tone when you have an incoming call. Press the Call
Answer/End button to answer the call. Press the button again
to end the call.
3 If you connected your headset to an MP3 player, turn on the
player and start playing music.
Note: If the audio seems distorted, use the audio adapter. Attach the
3.5 mm adapter to the plug on end of the cable.
Note: The voice microphone will not function if the headset is
connected to a phone that requires the adapter.
Using the ANC (active noise canceling) feature
When the ANC feature is turned on, your headphones block
ambient noise. The audio sent though the audio cable is not
affected. When the ANC feature is turned on, the status
indicator lights green.
• To turn on the ANC feature, slide the ANC ON/OFF switch to
the ON position.
• To turn off the ANC feature, slide the ANC ON/OFF switch to
the OFF position.
Call answer/end button
ANC on/off switch
ANC on - green
Charging - red
USB charger slot
QUICK SETUP GUIDE
Solace
Active Noise-Canceling Headset
RF-JJX15